EN · FR

Resources

Resources

Field case studies and engineering white papers on three-phase UPS systems, grounded in published manufacturer and standards evidence.

Glass-walled corridor along a data centre with yellow walls

White Papers

UPS redundancy for Canadian data centres: N+1, 2N, and distributed-redundant architectures compared

An engineering decision framework for module and system redundancy, concurrent maintainability, bypass behaviour and Tier objectives, across manufacturers

Selecting flywheel, battery and supercapacitor ride-through for three-phase UPS systems

Ride-through technology should follow duration, power, cycling, generator behaviour, temperature, maintenance and critical-load reserve.

Grid-interactive UPS opportunity and operational risk boundaries

Grid services can use only capacity left after the critical-load reserve, operating constraints, battery duty, warranty, controls, settlement and fail-safe priority are proven.

Case Studies

EcoDataCenter: four Schneider Electric Galaxy VX UPS systems in a 2N data centre

An evidence-led review of Schneider Electric's published Galaxy VX deployment in Falun, Sweden

Challenging a marine UPS battery proposal on runtime density and service access

An anonymized proposal-stage review of front-terminal battery sizing in a constrained cabinet

A hospital combined a large UPS fleet with centralized monitoring and emergency service

Riello UPS reports that Cisanello Hospital built a fleet of 356 UPS units across about a dozen models and monitors them from a central control room.

Flywheel UPS and generator integration protected MRI equipment from power disturbances

Caterpillar reports that Jefferson X-Ray selected a flywheel UPS, a generator set and a generator-start module for sensitive MRI and imaging equipment.

A battery-free medium-voltage UPS architecture supported a large technology campus

Piller reports that NetApp changed a conventional static UPS and battery design to a diesel-coupled flywheel architecture for its Bangalore campus.

Brand names are trademarks of their owners and are used only to identify the equipment we service. We are not the manufacturer and are not affiliated with it.