EN · FR
Eaton  ›  9390

Eaton · 9390

Eaton 9390 three-phase UPS

The Eaton 9390 is a double-conversion three-phase UPS (formerly Powerware 9390) rated 20 to 160 kVA.

Eaton 9390 three-phase UPS
Phase
3PH
Models
6
Lifecycle
Discontinued, serviced

Eaton 9390: key facts

For 9390 units more than 10 years old, Eaton offers a Service Life Extension Program that resets the electronics rather than replacing the UPS.

Sources, checked October 3, 2026: Eaton, 9390 UPS page; Eaton, 9390 Service Life Extension Program brochure; Eaton, UPS End of Service Life master table PL161010EN (rev. May 29, 2026).

Is the Eaton 9390 discontinued? What replaces it?

Yes. Eaton's 9390 page is marked discontinued and states that the Eaton 93PM is a complete UPS solution comparable to the 9390. Eaton also offers a 9390 Service Life Extension Program, and its service table keeps the 9390 in full support until best efforts begin in 2027 (208 V) or 2028 (480 V), or 2034 and 2036 for units under the extension program. See the Eaton 93PM page.

Units already installed keep working after the manufacturer's cut-off; what changes is parts and factory support. We maintain discontinued units and plan the replacement when it makes sense. How to plan the replacement of a discontinued three-phase UPS.

THREE PHASE POWER PATH3 PHASE INPUT480 V or 208 V feedRECTIFIERAC to DCDC BUSregulatedINVERTERDC to clean ACCRITICAL LOADracks, plant, imagingBATTERYon the DC busSTATIC BYPASSmaintenance and overload pathDouble conversion: the load stays on the inverter,so an outage produces no transfer gap.

How a three phase double conversion UPS carries the load, and where the bypass sits.

9390 models

The orderable configurations we supply and service:

ModelRatingPhase / VoltagePart numberStatus
Eaton 9390 20kVA (formerly Powerware 9390)18 kW3ph in/out (3:3) 208/480VTA0211001130010EOL
Eaton 9390 40kVA36 kW3ph in/out (3:3) 208/480VTA0411001130010EOL
Eaton 9390 80kVA72 kW3ph in/out (3:3) 208/480VTB0811001130010EOL
Eaton 9390 120kVA108 kW3ph in/out (3:3) 208/480VTC1211001130010EOL
Eaton 9390 160kVA144 kW3ph in/out (3:3) 208/480VTD1611001130010EOL
Eaton 9390 (20-160kVA family range)18 kW3ph in/out (3:3) 208/380/400/480/600V·EOL

Specifications

Phase3ph in/out (3:3)
Voltage208/480V
Models6
StatusDiscontinued

Batteries and battery cabinets for the Eaton 9390

Battery strings and cabinets depend on the configuration and runtime. When a string reaches end of life, replacement batteries for the Eaton 9390 are matched by cabinet and block type.

Eaton 9390 service in Canada

We service the Eaton 9390 across Canada: preventive maintenance, battery replacement and emergency repair, including units the manufacturer no longer supports. We are a Canadian UPS service and supply provider, working on three-phase systems since 2012.

Planned visits and emergency calls are arranged through on-site service for the Eaton 9390.

Sizing, redundancy and custom builds

We engineer the solution: load and growth analysis, redundancy (N, N+1, 2N), runtime and battery sizing, paralleling and switchgear, and custom configurations where the standard catalogue doesn't fit. Because we supply every major brand, the 9390 is one option we weigh on its merits, not the only answer.

Common questions

What is the Eaton 9390?

The Eaton 9390 is a double-conversion three-phase UPS (formerly Powerware 9390) rated 20 to 160 kVA.

Is the Eaton 9390 discontinued?

Yes. Eaton's 9390 page is marked discontinued and states that the Eaton 93PM is a complete UPS solution comparable to the 9390. Eaton also offers a 9390 Service Life Extension Program, and its service table keeps the 9390 in full support until best efforts begin in 2027 (208 V) or 2028 (480 V), or 2034 and 2036 for units under the extension program.

What replaced the Eaton 9390?

Eaton's 9390 page is marked discontinued and states that the Eaton 93PM is a complete UPS solution comparable to the 9390. Eaton also offers a 9390 Service Life Extension Program, and its service table keeps the 9390 in full support until best efforts begin in 2027 (208 V) or 2028 (480 V), or 2034 and 2036 for units under the extension program.

Who services the Eaton 9390 in Canada?

A Canadian UPS service and supply provider, in business since 2012, services the Eaton 9390 across Canada: preventive maintenance, battery replacement and emergency repair, including discontinued units. Call 1 (438) 881-3363 or email info@threephaseups.ca.

Request a quote: Eaton 9390

Tell us the application and we reply within 4 business hours with the sizing, the right system, the installation and a written quote. Three-phase installs usually need a licensed electrician, so let us know if you have one.

Do you have your own electrician?
Yearly preventive maintenance?

Or email info@threephaseups.ca · 1 (438) 881-3363

Brand names are trademarks of their owners and are used only to identify the equipment we service. We are not the manufacturer and are not affiliated with it.